Electron Probability Lab Report

Cynthia Johnson Period 3 Experiment 11: Electron Probability I. Statement of Purpose: We determined the hit probability of a dart by throwing it onto a fixed target one hundred times. IV. Data* *Attached V. Results and Questions 1. (a) *Graph (b) The probability that the dart will hit in ring four is 16 out of 100. A dart will be most likely to hit the bulls-eye about 5 cm from it. (c) Our graph has a spike in hits on the ring.Also, the graph in figure two has more of a curve that goes up at the end, and ours goes down at the end. 2. (a) *Graph (b) The probability of a hit in any given unit area on the target varies with the distance of that area from the bulls-eye because of the positioning. The person that his higher up could be over the target differently than a person that is shorter. I would but it towards outside, because the outer-most rings got the most hits. c) Our hit density curve has a spike in it, while the one in figure three does not. 3. (a) No, because it varies from person to person, based on height and distance from the person and the target. Also, whether they aimed or not. (b) No, because they are in different groups. 4. (a) Quadrant 1 has 25 hits in it, quadrant 2 had 25 hits in it, quadrant 3 has 26 hits in it, and quadrant 4 has 24 hits in it. (b) We were almost exactly even in each quadrant, and we did not favor any certain quadrant over the other by very much.

Biases

Person-positivity bias is the tendency to evaluate an object more favorably the more the object resembles an individual human being. Generally, the more a comparison target resembles a specific person, the more familiar it will be. However, groups of people are considered to be more abstract concepts, which leads to less favorable judgments.With regards to the optimistic bias, when people compare themselves to an average person, whether someone of the same sex or age, the target continues to e viewed as less human and less personified, which will result in less favorable comparisons between the self and others. false-consensus effect or false-consensus bias is a cognitive bias whereby a person tends to overestimate how many people agree with him or her.There is a tendency for people to assume that their own opinions, beliefs, preferences, values and habits are ‘normal' and that others also think the same way that they do. [l] This cognitive bias tends to lead to the perception of a consensus that does not exist, a ‘false consensus'. This false consensus is significant because it increases self-esteem. The need to be â€Å"normal† and fit in with other people is underlined by a desire to conform and be liked by others in a social environment.Counterfactual thinking is a term of psychology that describes the tendency people have to imagine alternatives to reality. Humansare predisposed to think about how things could have turned out differently if only†¦ , and also to imagine what if?. Counterfactuals are conditional propositions, containing an antecedent and a consequence (e. g. , If Matt had run, he would have caught the bus. )

Anheuser-Busch Essay Example | Topics and Well Written Essays - 1000 words

Anheuser-Busch - Essay Example While most of the processes are undertaken under the same production plant, the first stage of the production process is undertaken in a different facility, where the raw materials to be used in the production process, such as barley and rice are germinated under controlled environmental conditions, to develop the grains’ natural enzymes (malt), in readiness for the next process. This activity occurs in the maltster, as the initial component of the production facility design (Knoedelseder, 2012). From here, the production process proceeds to the kiln, which is the second component of the production facility design, where the germinated raw materials are then dried under controlled temperature. It is at the kiln that the color of the grains is determined, by controlling the temperatures based on the desired color of the beer to be produced (Hernon, 1972). Additionally, the kiln also aids in the control of the flavor of the beer to be produced, by drying the grains to different degrees, based on the desired flavors. ... The three components of the production facility design are housed in the malt plant, after which the product produced from the malt plant is now taken to the brew house, where the rest of the production process is to continue. In the brew house, the products from the mash plant, which are now found in the form of already milled and grounded powder, are mixed together with water at the mash tank, which is the fourth component of the production facility design. Mixing the mash plant products is done at the right controlled temperatures, where the enzymes in the malt are now converted from starches into sugars, forming a product referred to as wort sugars, which is a fermentable sugar product (Hernon, 1972). This process is referred to as the wort formation, which determines the flavors of the beer to be produced, depending on the ingredients of the malt mash and the controlled temperatures that are applied. To obtain the wort, the mixture of water and the powdered mash plant products a re strained in the lauter tun; the fifth component of the production facility design, to give out the amber liquid, which is called wort. This is an important process in the beer production process, since the components, color and flavor of the wort determines the aroma, the taste and the overall taste of the beer finally produced (Hernon, 1972). From here the process proceeds to the six component of the production facility, which is the brew kettles (Knoedelseder, 2012). This is the container that holds the wort produced in the previous stage, which is then boiled and then mixed with hops. Hops are the major spices of the beer, which are added to produce the brand that is desired, differentiated on the basis of special flavor, aroma and beer character (Lang & Rubovits, 1992).

The Internationalisation of Google Research Paper

The Internationalisation of Google - Research Paper Example First, the Uppsala model highlights the presence of a sporadic export program, which is not controlled by companies but the forces of demand and supply. The export process is also achieved through the help of independent representatives who operate a foreign sales subsidiary within the country of interest (Johansson & Vahlne 2009, p.1411). Finally, the Uppsala model is based on the adoption of a foreign manufacturing and production of units, which will be used to meet the demands of the market by the multinational. To achieve this expansion program, companies such as Google must start their internationalization program in a physics approach, focusing more on nearby markets. This is important in acquiring enhanced knowledge on the operations of the market and to pool together the necessary resources needed to expand to more distant markets. Google first increased its operations to various markets in the United States at the beginning of the millennium as a way of acquiring critical ma rket information and the resources needed to operate in such markets. Beyond the domestic market in the united states, Google entered Canada and Mexico to enhance its understanding of multicultural environments and prepare for major expansion in different parts of the world especially Europe. The second step of the Uppsala internationalization model includes the establishment of various foreign and domestic subsidiaries to augment the functions and operations of the business beyond the local market.

Economic of race and gender Assignment Example | Topics and Well Written Essays - 750 words

Economic of race and gender - Assignment Example These films could be brutal but sometimes, reality is worst than we would like it to be. The stories are just examples of what really happens in this world, whites discriminating Blacks or Asians and men acting like gods over women. What could be alarming is to know that there are also other skin colors discriminating the whites and more shockingly, women discriminating men. The films may have not shown the latter but in reality, things happen and it is not a news to break because there have been news of domestic violence also where the men are the victims. It is sad to realize that we can not escape these realities and they could happen to any of us. It is then very helpful to be educated about the issues on race and gender discrimination. Taking this class has opened my eyes and my understanding of the existence of such acts, now I know the rights of a person one needs to fight for, as well as what way of thinking one should have so as not to involve ones self in such actions. I believe that if I consider not discriminating, there would be one less racist in this world and no matter how minute its effect could be; still I could impact the world I am moving in. Diverse social positions can lay the foundations of a person’s political and economic access. For instance, a poor person can be deprived of education in his early years because he has to work in order to survive. Eventually, he will have minimal probabilities of ever going to school to get a better job in the future. Politically, he would have limited access to the rights of a regular paying worker if he ends up with menial jobs which do not give him the benefits of government employed workers. Loss of job pushes a person to self-employment particularly getting in to business because it gives advantages like being the boss of oneself, the opportunity for success and the convenience

Compare the way in which institutionalists and Marxists conceive of Essay

Compare the way in which institutionalists and Marxists conceive of the state and its role in the economy - Essay Example By the 1960s, there was ageneral opinion of living in a ‘mixed economy’ (also known as organised capitalism), which changed dramatically since the mid-1970s, when Neo-Liberalism came into existence thataimed atending mixed economy and bringing back market principles unimaginable inthe years just after the WWII.The emergence of Neo-Liberalism in the last few decades has changed the nature of debate on the State’s role, and the state is no longer regarded as a neutral guardian of its citizens, but as a major tool in the hands of the economically powerful social classes or as a predator (Chang, 1994). In this context, the essay will examine the Institutionalists and Marxists notions on the state and its role in the economy, two major theories on political economy that were popularduring the latter half of the twentieth century. The term ‘free market’ generally refers to economy that is free from state intervention. To analyse whether a particular market is free or not, one must review the underlying institutions thatframe the structure for obligations and rights of participants in a specific market,along with various other ‘externalities’ (Schotter, 1985). The institutions that must necessarily be analysed includeregulations(formal and informal ones) that govern the organisation and exercise of interests (regulations on lobbying, political relationshipsand incorporation);ideologiesassociated with concepts of rights and justiceprevalent in that particular society; andthe institutions that ascertainstructural changes in rights and obligations, such as processes for social or legal changes. Therefore, by defining ‘free market’ and ‘state intervention’one can also analyse whether market failure is evident and if state intervention may make the failing market more efficient. From the perspective of the

A Plan for Growth Essay Example | Topics and Well Written Essays - 500 words

A Plan for Growth - Essay Example Another alternative that is available for Andy involves equity financing. Unlike debt, equity financing for small businesses undergoing expansion are less risky. Equity financing includes seeking fund from angel investors and venture capitalists. Angel investors are affluent individuals who are willing to invest in an expansion in quest for profit and other personal interests like involvement in the business operation. Venture capitalists, on the other hand are professional investors who are only seeking high returns for their money (Ward, 2000). There are various pros and cons in using the financing alternatives listed in the previous question. In general, using debt financing is advantageous to Andy as his ownership in the company is not diluted. Also as creditors will have no ownership in the business, they cannot meddle with the decisions and policies implemented to run the business (Growing Your Business, 2006). However, utilizing debt financing will leave an obligation to the company to pay interest at certain periods. This will be very detrimental to the company especially if Custom Stitches is unable to generate a profit.

Similarities and differences between japan's keiretsu and south Essay

Similarities and differences between japan's keiretsu and south korea's chaebol - Essay Example These enterprises were established by the Meiji government in the late nineteenth century, as a way to invigorate Japan’s industrialization. Therefore, the main reason for the formation of these business enterprises was to respond to failures in the market. Companies owned by these zaibatsu’s were vertically organized and owned by families and sometimes, holding companies. According to Rosati (1993), trading companies and banks were the most powerful industries among the zaibatsu. This is because they controlled the distribution of goods and operations among the zaibatsu’s. The zaibatsu were abolished at the end of the Second World War by the Allied Occupation Forces, when their shares were allocated to the Japanese public, in order to promote competition and equality. Rosati points out that â€Å"during this period, however, the private sector had little funding capacity, and corporations among themselves unable to raise the capital they needed† (1993, p. 85). It was during this time that the practice of raising funds through loans from banks was embraced. Due to the low prices of shares and accumulation of capital in the private sector, corporations were exposed to acquisitions. This was further compounded by the fact that the stock owning capacity of banks was limited by the 1947 Antimonopoly Act (Rosati, 1993). Consequently, corporations had to invest somewhat equal amounts of capital among themselves to create stability among shareholders although there was no physical exchange of the money. In the 1960s, Japan joined the Organization for Economic Cooperation and Development (OECD) and this led to a relaxation of capital transaction policies by the government. Since the owners of the corporations feared being taken over by foreign investors, they conducted cross ownership that brought back the links that had existed among zaibatsu groups prior to the Second World War and this led to the formation of Keiretsu groups. Keiretsu gro ups were very significant in rejuvenating the economy of Japan after the Second World War. Small industries in Japan were able to develop, despite the fact that Japan’s economy was detached for the world markets and highly monitored. Examples of keiretsus include Mitsui and Mitsubishi. South Korea's Chaebols: Origins and Features Chaebols were established by the Japanese colonial rule in Korea during the 1920s and 1930s. In fact, Korea’s Chaebols were formed in a similar way to the Japanese keiretsus. The main reason for the establishment of Chaebols was so that Japan could benefit from Korea’s economic development. The establishment of chaebols began when Japan set up privately owned businesses in Korea, but strictly controlled business procedures, license applications, and credit. Japanese rule in Korea eventually came to an end, and this gave the Korean’s freedom to adjust the business procedures and processes of the Chaebols. Dubois (2004) points out that â€Å"the effort was coordinated by president Park Chung Hee, the president of South Korea from 1961 until his assassination in 1976† (p. 42). Under the concept of chaebols, conglomerates usually controlled by a family were formed under a sole holding company. Each company held another company’s shares and through this, they were all interlinked. The chaebols however had no financial institutions and this required financial support from the government, since South Korea’s banks are joined together and controlled by the government.

Critically discussed the ethical, legal, and social issues arising Essay

Critically discussed the ethical, legal, and social issues arising from the use of assistef reproductive technologies - Essay Example ough fertile couples can also undergo the processes due to genetic, sex selection or health considerations such as risk of infecting the child with AIDS. Methods used in ART include Intrauterine Insemination (IUI), which involves engaging a males sperm into a womans uterus via a tube. In Vitro Fertilization is another process in ART where sperm and eggs from the couple are taken and incubated to form an embryo with steps such as stimulation of egg maturation, egg recovery, fertilization and embryo transfer with assistance from a physician. There is also the third party assisted ART such as the use of a sperm donor, egg Donor, surrogates and gestational carriers. Even as these methods have been effective in enabling many couples achieve the dream of being parents, there have been debate over the ethical legal, social and ethical issues surrounding processes used to achieve this goal. This research paper highlights some of the ethical, legal and social arguments presented in support or opposition to ART. Ethical issues in ART surround the practice of implanting multiple embryos at one time to cut on expenses for couples since there is no insurance coverage to support this form of treatment. For the process to be successful at a lower cost even when more than one attempt is undertaken couples are encouraged to fertilize many eggs at once and implanting multiple embryos while hoping one among them will be carried to term. Success rate in ART also depends on the years of women involved in the process (see the graph below). Multiple fertilization of these eggs leads to the problem of multiple pregnancies with parents facing the prospect of giving birth to more than one baby. When this happens, couples especially mother and their offspring face increased social, psychological and medical problems. Research has indicated that multiple pregnancies results in a number of health complications especially those related to obstetric complications, prenatal morbidity,

American Registry for Internet Numbers Essay Example for Free

American Registry for Internet Numbers Essay 1. American Registry for Internet Numbers (ARIN)- Provides services involving technical coordination and management of internet number resources. They support the internet through the management of internet number resources and coordinates the development of policies for the management of IP number resources. They also provide services for technical coordination and management of internet number resources in its respective services region. The services include IP address space allocation and ASN allocation, transfer and record maintenance. B. Internet Assigned Numbers Authority (IANA)- Responsible for the allocation of globally unique names and numbers that are used in Internet protocols that are published as RFC documents and for coordinating some of the key components that keep the internet running efficiently. They allocate and maintain unique codes and numbering systems that are used in the technical standards/protocols that drive the internet. Among such protocols are the domain names, number resources and Protocol assignments. C. Asia-Pacific Network Information Center (APNIC)- An organization that manages the internet number resources within Asia. They provide the number resource allocation and registration services that support the global operation of the internet. 2. An Ipv4 uses 32 bit IP addresses. The max number of of IPv4 addresses is about 4 billion. 3.The max number of Ipv6 addresses is about 48 billion. 4.The world ran out of Ipv4 addresses February 1, 2011. All networks must now allocate Ipv6 addresses. 5. Ipv4 addresses are exhausted 6. Ipv4 is still being used because the address pool supports the continual demands and extends its usefulness. Also because Ipv4 and Ipv6 are not compatible. 7. No because you cant resell them. Sources https://www.arin.net/ https://www.iana.org/ https://www.apnic.net/

SWOT Analysis Of Parle Products

SWOT Analysis Of Parle Products The intent of the assignment is to analyse the operation process of manufacturing or service organisation, thriving to achieve the efficiency and productivity in the operations process, through various organisational and operational strategies carried out on a short term or a long term basis. The analysis of the report is based on the various key finding which determines the success of organisation and how company manages between the quality, cost, speed, dependability and flexibility of its products using the key competitive factors such as order winner and order qualifiers to sustain in the market. The process design used by the organisation is to improve competence and effective inventory management style with help of suppliers and distributors; analysing the problems faced by the organisation and solution for the same. INTRODUCTION Parle is one of Indias largest biscuit, confectionery and snacks manufacturer it has been set-upped in vile Parle Mumbai in 1929. As a organized segment of the FMCG (Fast moving consumer goods) industry, FMCG products are generally replaced within a year and include a range of product provided to the consumer that may be Durable e.g. Food, soap, cosmetics, tooth cleaning products, shaving products and detergents and non-durable products such as glassware, bulbs, batteries, paper products, and plastic goods. Babaria, M. and Dharod, M. (2009) Parle Operation Management is to manage of resources and delivery system and the duties entitled to the operation manager control of the cost, monitoring the efficiency of the production and asset management, The viewpoint of Parle Company is to attract as much of youth and grown-ups through its product with the mission to provide happiness among children and adults not only in the metro cities but also tier 2 and tier 3 cities in the country. On a short- term basis the company objective is to create awareness about the products among the youth and on long-term duration is to be the market leader. Major competitors of Parle are the ITC sun-feast ltd, Britannia, Nestle HUL (Hindustan unilever ltd). Parle provides a range of biscuits such as Parle-G, krackjack, Hide and seek, Milano etc. confectionery like melody, mango-bite, orange candy etc. and snacks like Jeffs, cheese ling etc. Parle are market leader and in their category and own 40% share of the biscuit market share and 15% share of the total confectionary market in India, Parle has transformed into a multimillion company over the years. Based on the product variation provided by Parle the customer are not bound by age they can be consumed by people of all age group even the adults or senior citizens. E.g. Parle G is widely excepted product, the customers of Parle are not restricted to the local or regional tier1, 2 3 markets but also on a global scale by implementing top down approach strategy in the organization. (parleproducts., 2012) Macantosh HD:Users:pagdant:Downloads:1.png TRANSFORMATION PROCESS FEEDBACK INPUT TRANSFORMATION PROCESS RAW MATERIAL Wheat flour, sugar, hydrogenate vegetable oil, salt, milk, added flavors PRODUCTS Biscuits, snacks confectioneries OUTPUT Transformation process is activities involving no. Of input, this adds value and transforms into output for customer. (Openlearn.open 2003) Through the transformation process various raw material used at input at Parle, which goes through the transformation process and made into biscuits, snacks confectioneries for the consumers. SWOT ANALYSIS OF PARLE PRODUCTS STRENGTH WEAKNESS Low price Irregular supply Distribution system Dependent on Parle-G brand Wide range Delivery system OPPORTUNITY THREATS Export potential Competitors (Britannia, ITC) Untapped Rural market Substitutions (toast) Retain of loyal customers Bakery products Suppliers. The above analysis reflects strength of the company lies in its low price technique, wide range of products and distribution system of Parle, opportunities prevailing are the export potential, untapped rural market, due to increase in the purchasing power of the consumer retention of loyal customers, Threats faced by Parle are from the competitors, substitutes available in the market and the bakery products whereas the weakness posses are the irregular supply, dependency on the brand Parle-G and weak delivery system to penetrate in rural areas. Babaria, M. and Dharod, M. (2009) STRATEGY Strategy adopted by any organization is develop the capabilities required to reflects the needs of the customers and market, direct how to spend key resources like time and money and to cope up with the greater level of complexity different business units are maintained in the organizations. Different types of strategy used at different levels in the organization. 1. Corporate level strategy is decided by the company where to invest the funds of the organization in order to meet the business demand of todays and the future.eg. E.g. increase in the volume of sales through sales staffing, increase in sales by increasing the number of factory floor. 2. Business unit strategy is implemented by different part of organization to achieve the desire objective in a specific market based on the present and the future market. E.g. marketing, finance, sales and marketing and operations departments. 3. Functional strategy is to maintain the key resources using the strategic and the day-to-day task. E.g. Market requirement and function of operation manger in monitoring the line of production. Hill, A. and Hill, T. (2011) The word strategy signifies direction and how one should implement it. Strategies adopted by Parle are the business unit strategy where range of product is sold to identify group of customers in competitive market and functional strategy where decision of key resources such as the raw material required for the production is done on day to day basis by a operation manager to compete in the market, to expand in the market, to have an insight of the competitors. Hill, A. and Hill, T. (2011). Macantosh HD:Users:pagdant:Downloads:attachments:2.png Macantosh HD:Users:pagdant:Downloads:attachments:10.png CAUSE EFFECT Hill, A. and Hill, T. (2011) Process Producing mass product irrespective the taste Diminish of market share of Parle Competitors Due rise in growing Competition. Fluctuating demand Due to high competition the demand for parle product is not constant. Innovation Using same raw material over the Years PERFORMANCE OBJECTIVE Performance Objectives are key measures to align the needs of the customer with the desired effectiveness of the overall business. Performance objectives are Quality, Speed, Dependability, Flexibility and Cost. Each of these dimensions adds its twist to the value proposition. Each dimension hypothetically appeals to different customers. Delivery each objective simultaneously at their highest levels of all these product attributes, operations mangers need to organize objectives based on priority, also identify which are an order winners and qualifiers of the targeted critical customers, Operation management (2012). Quality Quality is fitness for consumption in terms of meeting customers needs and desires. Quality can either be an order winner or order qualifier for customer based on the quality maintained. Quality conformance, which means to consistent delivering services based on design specification which, in turn, needs to reflect customer needs. Operation management (2012). To maintain good quality companies like Parle need to maintain and manage quality gaps. Hygiene is the precursor of every process in Parle. Every batch and confectionery is thoroughly checked by an expert staff by adopting Quality conformance level after every stage maintain similar quality throughout all nations neglecting quality control system. Cost Cost is one of the major contributions in business welfare since products that cost less but have good quality attract customers. Operation managers try to reduce costs and also maintain quality so the company profits. Operation management (2012). Parle as a company tends to maintain quality and keep a low purchase cost. Parle follows a policy of Kaizen, which means to produce more and more value with less wastage attaining better environment and developing stable process by standardization. Macantosh HD:Users:pagdant:Downloads:attachments:3.png Buthmann, A. (2010) describes that Quality cost is the Cost caused through producing of defects. Quality cost is most expensive concept used at Parle to cover the good and poor quality cost. Buthmann, A. (2010) describes that External failure is the cost associated to the external deficit of the product received by the consumer at Parle external cost is to maintain the quality cost is spend on the complaints received from consumers through online feedback, losses occurred due to reduction in sales due market acquisition by the competitors and environmental cost. Internal failure occurs before the product is delivered to the customers, not confirming to requirement of customers through the product leading to less satisfied customers, Internal quality Cost at Parle is due to shortage of raw material is due to smaller storage capacity limited to only 3 days. Buthmann, A. (2010). Appraisal cost occur in-order to maintain quality in all stages, conformance to quality standard Through Quality storage condition, maintaining Hygiene and monitoring quality by expert staff adopted at Parle. Buthmann, A. (2010). Prevention quality cost is to prevent poor quality of product is provided to consumer Buthmann, A. (2010). Parle spends in Quality improvement in staff inspection, Quality planning of new product and Quality improvement in team decision. Dependability Dependability is a degree of availability of the product when the customer needs or requires product. Operation management (2012). Parle is a multination company it deals with multiple nations it has a constant management of products regarding demand and supply. To cope with demand Parle produces 13 billion biscuits in a month. Flexibility Operations ability is to respond efficiently to changes in products, processes (including supply chain relationships), and competitive environments. Operation management (2012). Flexibility differs in companies but companies like Parle have a standardized approach and there is less change in the operations of the company. Speed It means by doing things faster to minimize the time between the order and the availability of the product to give a speed advantage to the wholesaler, retailer which ultimate the benefits to the customers. Slack, N. et al. (2004) Parle maintains their speed through their wholesalers who deliver their products to the retailers, which are finally received by the consumers. Parle maintain the speed by keeping a systematic approach to the system. POLAR DIAGRAM The polar radar chart depicts the priority of the performance objectives Slack, N. et al. (2004) in Parle. Parle as a company strives to produce the best material with minimum wastage. After quality Parle looks at customer benefit and cost management. By producing in bulk Parle maintain availability of products increasing dependability. Parle maintains standard procedure to increase operation speed. COMPETITIVE FACTORS Macantosh HD:Users:pagdant:Downloads:attachments:4.png ORDER WINNER Order winners The competitive characteristics possess by Parle are both time-specific and market-specific to Parle product are most economic since their products are starting at a price range of Rs2 Rs 25, Product range of Parle are into 3 categories Biscuits having 18 varieties of biscuit in the Indian market making them the largest biscuit manufacturer in the country. Sweets- Parle has 11 varieties of chocolate and candies in its product line-up. Snacks- fairly new to the market Parle have only 4 varieties of snacks in the market. Product design quality is initiated by Parle product by making use of automated packaging facilities and all the Parle product are manufactured under hygienic condition and maintaining quality standard at each stage of biscuits and confectioneries are thoroughly checked by expert staff using modern equipment at Parle they follow the seven HACCP principles for total quality management. Great care is exercised in the selection and quality control of raw materials; packaging materials and rigid quality standards are ensured at every stage of the manufacturing process (parleproducts, 2012) ORDER QUALIFIER Certain characteristics indicates that certain qualifiers are same for the entire market Hill, A. and Hill, T. (2011), which was seen also seen in Parle competitors where delivery speed plays a crucial role in providing the product to its end consumers and packaging of the product is done to attract the customers. LESS IMPORTANT FACTORS There are certain factors at Parle, which does not affect the production of the product irrespective of the located weather it is in tier1, tier2 and tier3. Hill, A. and Hill, T. (2011), Parle factory situated in teir1 and Promotion activates of Parle is not considered the unique selling point since to create hype in the market its mandatory to use various promotional activities to create awareness among consumers. ORDER WINNER ORDER QUALIFER LESS IMPORTANT FACTORS Order Winner is quality that helps companies win markets. In case of Parle policy is to strive to provide consistently nutritious and quality food products to meet customers satisfaction by using quality material and by adopting appropriate processes. Therefore Quality is an order winner for Parle. While, also producing the finest quality for customers like to sell it at convenient or cheap prices that are affordable by all people. This makes Purchase Price an order winner for Parle also. Whereas the delivery system and packaging is similar as their competitor therefore it is an order qualifier. Hill, A. and Hill, T. (2011). PEOCESS Macantosh HD:Users:pagdant:Downloads:attachments:6.png Most manufacturing organisations provides standard product in high volumes. The repeat, mass production and standardization of the product indicate a need of process design that would benefit these characteristics. Batch process seems to be feasible choice as it simplifies, automate and reduces manufacturing cost. Hill, A. and Hill, T. (2011). The designing of batch process can be such that it can be used and reused for manufacturing of range of products, hence enabling companies to reduce cost by investing in equipments. The downside to this process is that for manufacturing each product the process line has to be reset, it is costly and skilled officials can only make changes. Hill, A. and Hill, T. (2011). At Parle manufacturing is based on batch process to manufacture their products; as mass production is possible without hampering the quality standards of the product. Being cost effective is one of the major criteria at Parle as it uses the same line to manufacture more 33 varieties of products. Parle do not make specialized product, as their main target are the masses. Standard products are expensive and not in mass production by Parle. Mass products are cheap and manufactured in large quantities. VOLUME PRODUCT VARIETY VARI Milano, Hide Seek, Bourbon. STANDARD PRODUCTS None MASS PRODUCT Parle-G, Krack-Jack, Milk Shakti. SPECIAL PRODUCTS Untitled.png Hill, A. and Hill, T. (2011) argues that volume variety demonstrations relationship between the product categories and volume of the product to be produce at Parle which shows the manufacturing is based on standardize and mass production. LINE OF FIT The above graph depict the line of fit maintain by parle in order to survive in the market through the availability of the products in the range of the line of fit. Kaul, D. (2012) MANUFACTURING FLOW CHART RAW MATERIAL TESTING MIXING MOULDING BAKING COOLING PACKAGING The manufacturing process flow chart illustrates how the production process is carried at Parle, In the initial stage, Testing of raw materials is carried out, which is sent for moulding through the conveyor belt the unfinished product goes through oven for baking and then to cooling of the product and later for packaging through machines like box tapping and sealing machine and forward to dispatched section for the whole sellers to channelize to the retailer for the customers to buy. PACKAGE AND PROCESS Macantosh HD:Users:pagdant:Downloads:attachments:7.png The physical resource used for Packaging of the finished goods at Parle is done through the help of box tapping and sealing machines while facilitating packaged goods and finished product. The activities required during the process is done in front office i.e. administration room coordinating with the back office i.e. the storeroom, dispatch section and production area in addition to the process Parle also provides flow of material, information to the customers with the help of implicit service where visitors are allow to visit the factory by arranging a visit at the production section at the front office. Kaul, D. (2012) LAYOUT Hill, A. and Hill, T. (2011) argues that process or functional is an arrangement of process and function at a particular area. The layout used at Parle is a process or functional layout reflecting that the layout is made in such a manner that similar operations are used in one areas where large batched of goods are produced. Hill, A. and Hill, T. (2011). This type of layout is suitable for Parle where large batches of production is done with help of various functions where layout reflects the stages involved in the making of the Parle products that is the product making is started with the testing of the raw material then moulding and mixing machine goes to oven and then for cooling before going to the packaging and then finally as a finished product. Functional layout advantages 1. Wide range of products Parle as brand itself produces around 33 different varieties of products for consumption at its Parle factory at vile-Parle. 2. Lower capital cost -The infrastructure at Parle used for the production i.e. the autonomous machine helps in reduce the capital cost incurred in making of the product. 3. Utilization of processes since all the resource used in the making of the Parle product are group in the factory itself helps in proper utilization of all resources e.g. Equipments and skilled staff. Hill, A. and Hill, T. (2011) Functional layout disadvantages 1. In-process inventories at Parle are the cost of the direct material, direct labour, and factory overhead placed into the products on the factory floor. 2. Material handling can be costly and inefficient handling of inventories at Parle are costlier since storeroom are made to accommodate these inventories in proper conditions, which add to the cost and are inefficient when the sales revenue is not up to projected mark. Hill, A. and Hill, T. (2011) The production process followed at Parle is Repeat (standard) Product where the making of product is done a repetitive basis designed for functional layout where high volume of production is done using batch and mass production. INVENTORY Inventory comprises of the input which is part of the unfinished goods goes through various operational process stages know as work in progress for a desired output in the form of finished products to sold to the customers. Hill, A. and Hill, T. (2011) The inventory type adopted by Parle is the process inventory where the raw material for 3 days is store in the warehouse from where they are sends for testing the raw material weather it is meeting required standards for the production. After testing raw materials are sent for production. Where the raw material goes through various stages of baking and cooling and shifted to the dispatched room where they are stored and delivered to their distributors and the end customers. The raw material used in the product can be stored roughly for 3 days because the plant is designed in such a way that the raw material cannot be stored more than 3 days. INVENTORY FLOW CHART STORE ROOM WORK IN PROGRESS SUPPLIER DISPATCHED SECTION CUSTOMERS The inventory flow chart depicts the form of inventory present throughout the three-process stages i.e. input, operation process and output at Parle. The inventory such as raw material like wheat flour, sugar, hydrogenate vegetable oil, salt, milk and added flavours are stored in the store room from where they used in the process stages for the manufacturing of biscuits, sent to the dispatched section where the packaging takes place and distributed to the wholesaler and then to retailers for the end consumers. Due to limited duration of the storage capacity there are certain issues that have to be dealt such as to meet the global requirement and the diminishing demand for the products from local markets. SUPPLY CHAIN Before maintaining the supply chain has to decide whether to make the raw material or buy the material. Every manufacturing unit has different benefits if they make in-house / outsource. Advantages for making in house are that company has more control over the material it is more flexible and last minute adjustments are possible. The advantages of outsourcing are that cost is easier to manage and increases focus on final product. In case of Parle, raw material is outsourced and the final product is made in house. This is depicted through their supply chain. Supply Chain comprises all the steps required to supply a service or product to a customer. Hill, A. and Hill, T. (2011). Parle has many products, which have multiple raw material requirements. Multiple suppliers of provide these materials as their tier 1 supplier. Tier 1 supplier such as Godrej, Gurgaon Sugar Mill, Kopoli Flour mill, Wallace Flour Mill and Ahmed Bhai Sugar Mill. Tier 1 Tier 1 Godrej sugar mills Tier 2 Tier 3 Retailor Wholesaler Final Customer Kopoli flourmill INTERNAL OPERATIONS Retailor Wallace Flour mill Wholesaler Ahmedbhai sugar mill WHOLESALER, Retailor CUSTOMER INTERNAL SUPPLY CHAIN PROCESS SUPPLIER Delay in Inventory The above figure reflects how inventory at parle are buffered and maintained at each stage through the gap in the supply chain. But with proper co-ordination with the activities in the supply chain helps parle to build a products design, customer management and final delivery of the product to be consumed. Hill, A. and Hill, T. (2011) Conclusion The report covers Distinctive features of Parle operation process through operation analysis of the organisation by taking an overview on the potency of distribution system and lower price advantage of Parle over it competitors, tremendous measure are taken to maintain quality and at the same time be cost effective, which can be reflected from their quality control methods and the way factory is designed to carry out operations and buffer their inventory through various stages of the operations and maintaining integrated supply chain management with the coordination of their suppliers parle develop a products design, customer management and final delivery of the product to be consumed, with the help of analysis carried out on parle we were able to identify the operational problems and provided with appropriate recommendation, which has assisted our group to know the functioning of an operation management and how the operational surrounding play a vital role in manufacturing of a prod uct or service delivered to a customers, which was the motive of our assignment. Hill, A. and Hill, T. (2011) RECOMMENDATION TYPE OF PROBLEM RECOMMENDATION A) STRATEGY MARKET SOLUTION Fluctuating in the demand. Rise in competition, Lack of innovative ideas (Same Use of raw material.) Diminish market share of parle. Parle should invest in capacity or inventory for fluctuating demand. Parle can improvement by using passive or proactive approach for better innovation and sustenance against rise in competitions. Parle should Constantly compare their order-losing sensitive qualifiers with their competitors, since a slight change in the environment can cause them to start losing market share. B) PROCESS PERFORMANCE SOLUTION Lack of flexibility Costlier to maintain the equipments Reset of process line. Operation volumes. Quality conformance level after every stage. There should be constant change in operation for better improvements. Equipments, which are not essential should be should out or should be leased rather buying the equipments. Different operation should be maintained line for different range of product instead of reset after the end of the every process. Reduction in depletion and the changeover and set-up times for manufacturing process. To maintain the operation volume labour and material should be properly utilised. Parle should build control system rather than conformance at each stage C) INVENTORY SOLUTION Cost of in-process inventory Handling of inventory Storage capacity Holding of inventory To reduce cost of the inventory Casual analysis should be done and inventory should be group into corporate, decoupling, cycle, pipeline and buffer for better handling and increase in the storage capacity to hold the inventory. D) SUPPLY SOLUTION Fluctuation cost of raw material E.g. sugar. Maintaining loyal suppliers due rise in demand. Slow technological up gradation compared to competitors. Parle should adopt the release cash method where they should delay the payment to suppliers leading to improvisation in operation. Build better relationship for constant supply of raw material, which will help to maintain loyal suppliers. To avoid cost on up-gradation of the technology it should be outsourced. Hill, A. and Hill, T. (2011)